Your Whole Home
WiFi Solution:

The Blazing Fast WiFi Router

GoNetspeed WiFi Router


Unstoppable Wi-Fi 6 speeds and performance...The best value for your device-packed home! The
GoNetspeed WiFi Router is an advanced in-home Wi-Fi 6 router that brings unveiled performance and
reliability to every corner of your home.

Features and Technical Specifications

  • One unit provides coverage up to 1500 square feet. You can install up to two additional Mesh
    Extenders in a single Wi-Fi network
  • The GoNetspeed Router will prioritize your Wi-Fi speed, automatically switching Wi-Fi channels and
    frequency to always deliver peak performance to your devices
  • Mesh Extenders are available for $9.95/month each. A Mesh Extender will help to eliminate dead
    zones and provide wall-to-wall blazing fast internet speeds. The GoNetspeed Technical Support
    team can recommend mesh units based on troubleshooting
  • In order to achieve faster speeds you will need WiFi 6 capable devices
  • Not sure if your router is working? If the blue light is on, you are ready to go!

Download the App

With the "Nokia WiFi" app you can control your GoNetspeed
WiFi network from your smartphone, share your guest network,
restrict connection for certain devices, make IP address changes,
view what devices are on your network, change your SSID
password and change the network settings.

GoNetspeed Mesh Extender

Do you have dead zones in your home where buffering, slower speeds and choppy Internet occur?
Mesh Extenders are available at $9.95/month to help eliminate dead zones and provide wall-to-wall
blazing fast internet speeds!

Mesh Extender Setup:

  1. To add your mesh extender, the primary/root device (your router) must be connected to Internet and its LED should light up blue. Check for Internet connectivity with laptop or smart device.
  2. Power up the mesh extender and connect the blue jack (WAN) to the yellow jack (LAN) of the root device with an Ethernet jumper cable.
  3. After the mesh extender's LED turns blue, disconnect its Ethernet jumper cable, which will cause the LED to turn red. Then, it should turn back to blue. The mesh device is now part your Wi-Fi network!

How to change your SSID and Password

  1. Connect to your WiFi network on your phone
  2. Tap Home Network on the home screen of the app
  3. Tap the edit icon on the bottom of the screen to get the 'change Wi-Fi' screen (or find it in the settings under Wi-Fi networks)
  4. Tap the pencil icon on the top right corner to edit the name or password of your Wi-Fi network
  5. Tap the check mark at the top right corner to save changes

© 2022, GoNetspeed. All Rights Reserved.